DTM4000
The DTM4000 is a digital handheld measuring instrument for various sensors with different physical measurands.
It is characterized by very simple handling.
The probes are automatically detected after switching on. The measured variables are shown on the two-line backlit display. Currently realized are temperature, humidity, air pressure and brightness.
The corresponding probes are ready calibrated.
The device is operated with two LR6 batteries (AA) or via USB.
The USB interface can be used for parameterization. The corresponding program is available as a download free of charge.
In battery mode, the device switches off automatically after 3min. This can be prevented via the software.
Scope of delivery:
- DTM4000
- Temperature probe LKM830/5
- Hard case black
- USB cable 1m
- 2 pieces LR6 1,5V batteries (AA)
- Configuration software is available free of charge in the "Downloads" tab
Order the temperature sensor for your devices via this page.
| Input: | Various sensors (see I2C sensors) | see I2C sensors |
| Measuring range: | according to sensor | |
| Measuring rate: | maximum 1/s | configurable via software |
| Battery: | 2xAA | |
| Current consumption: | 44mA | with temperature sensor |
| Battery life: | approx. 30h at 1/s | configurable via software |
| LCD: | 5mm digit height white font | |
| Interface: | Mini-USB | Driver from Internet |
| Connection: | M8, 4-pole | |
| Dimensions: | 120x25x80mm | LxHxW |
| Weight: | approx.175g | |
| Operating temperature range: | 0...60°C |
Documents
| Document | Format | Language(s) |
|---|---|---|
| Datasheet – DTM4000 Technical Specification |
  |
Software
| Program / Package | Format | Language(s) |
|---|---|---|
| Service Program – DTM4000 for Windows-PCs Parameterization Software |
ZIP | |
| Driver (ftdichip.com) USB driver |
Web | |
Responsible Person in the EU:
LKM electronic GmbH
Elgersburger Straße 1
99331 Geratal
Germany
info@lkmelectronic.de
https://lkmelectronic.de/
