DTM5080
DTM5080
The DTM5080 temperature acquisition module is plugged directly into the serial interface of a PC. An adapter is available for use on the USB port. It is suitable for the acquisition of temperature resistance sensors such as Pt100/1000, Ni100/1000 as well as other resistance sensors up to a maximum value of 2.5kΩ It was designed for accurate measurements in a wide temperature range. By connecting the sensor in 4-wire technology, a high overall accuracy of the device can be achieved in conjunction with a precise sensor. The resolution of the device is 0.01°C. The corresponding temperature or resistance value is output. An included data acquisition program records the measured values and stores them if required. Due to the control via simple ASCII characters, data recording by means of programming languages such as C or Visual Basic is also no problem. The module is characterized above all by very high accuracy and simple handling.Scope of delivery:
- DTM5080
- Standard cable probe Pt100, Kl. B, 3,5x30mm, 1m cable
- 2m extension cable for RS232 interface
- Evaluation software is available free of charge in the "Downloads" tab
Please note that not all sensors offered are equipped with a suitable plug.
Individual temperature probes are possible on request at any time.
Technical data
| Input: | Pt100/1000, Ni100/1000 and other resistance sensors | Sensors changeable |
| Connection type: | 4-wire circuit | |
| Measuring range: | Pt100 -200°C...845°C | |
| Pt1000 -50...400°C | ||
| Ni100 -60...230°C | ||
| Ni1000 -60...230°C | ||
| Resistance Ber.1 0...380 | ||
| Resistance Ber.2 0...2,5 k | ||
| Resolution: | 0,01°C | |
| Measuring rate: | approx. 3/s | |
| Linearization accuracy: | 0,02°C | |
| Type. System accuracy (without sensor): | <0,06°C | |
| Connection socket: | Binder 719 4-pole | as DTM3000-Pt100 |
| Operating temperature range: | 0°C... 70°C | |
| Power supply : | 6mA | supplied from the interface |
| Dimensions: | 32x58x16mm | W x H x D |
| Weight: | approx. 23g |
