DTM5081

DTM5081

The DTM5081 temperature acquisition module is connected to the computer via a mini USB cable. One channel is suitable for the acquisition of temperature resistance sensors such as Pt100/1000, Ni100/1000 as well as other resistance sensors up to a maximum value of 2.1kΩ. The second channel is suitable for the acquisition of temperature values from thermocouples. The corresponding temperature or resistance value is output. An included data acquisition program records the measured values and stores them if required. The input side is galvanically isolated from the output side. Due to the control via simple ASCII characters, data recording by means of programming languages such as C or Visual Basic is also no problem. The module is characterized above all by high accuracy and simple handling. By connecting the sensor in 4-wire technology, a high overall accuracy of the device can be achieved in connection with a precise sensor. For the thermocouple channel, cold junction compensation is performed internally. A neutral miniature thermocouple socket is used as the connection. Thus, many types of thermocouples can be detected.

Scope of delivery:

• DTM5081

• Standard cable probe Pt100, Kl. B 3,5x30mm, 1m cable

• Standard cable sensor thermocouple type K ø= 2 x 50mm, compensating cable 1.5mm GLGL 2x0.2mm², green mini plug

• USB cable 1m

• Evaluation software is available free of charge in the "Downloads" tab

You can find an overview of some of our offered probes here
Please note that not all sensors offered are equipped with a suitable plug.
Individual temperature probes are possible on request at any time.