Transmitter LKM143 for Pt100/Pt1000
The LKM143 is an analog transmitter for mounting in the connection head type J (MA) and can be designed for the Pt100 or Pt1000 measuring resistor according to DIN EN 60751. It converts the temperature-dependent resistance value of the sensor into a standard signal of 4...20mA. The lead resistance of the two-wire circuit can be compensated on site with the adjustment controller. The components are particularly protected by complete encapsulation with polyurethane.
The transmitter is supplied calibrated to customer specifications. Subsequent fine adjustment can be carried out on site by means of span and zero controllers.
The selection menu is available for configuration.
Please request individual measuring ranges beforehand using the >>Ask about product<< button.
In the case of analog transmitters, it may occasionally be the case that the desired measuring range cannot be realized. If the individual measuring range is confirmed by us, it can be entered in the >>YOUR COMMENTS<< field at the end of the ordering process.
Our tip: With the digital equivalent LKM146, individual measuring ranges are easily possible.
| Input: | Pt100/Pt1000 | 2-wire circuit |
| Measuring current: | approx. 0.8 mA | depending on sensor resistance |
| Zero Pt100: | -200…600°C | Value for 4mA |
| Zero Pt1000: | -100…450°C | |
| Span: | 20…850 K | zero point + span value for 20mA |
| Linearity error: | <0.1% FS | |
| Loop voltage: | 10...35VDC | reverse polarity protected |
| Output: | 4...20mA current loop | |
| Probe break: | >20mA | |
| Short circuit: | <4mA | |
| Response time: | <0,1s | |
| TC: | 0.01 K/°C | |
| Operating temperature range: | -40…85°C | |
| Humidity: | <95% | |
| Mounting: | J-head | |
| Dimension: | 25x14 mm | DxH |
| Potting compound: | Polyurethane, black | |
| Clamping type: | Screw terminals | |
| Clamping range: | 0,13...0,75mm² | |
| Weight: | approx. 10g | |
| Vibration: | 5g/10...200Hz | |
| EMC: | EN 61326-1 EN 61326-2-3 |
Emission and noise immunity |
► Operating instructions in PDF format
► Program for converting analog output values (mA or V) of transmitters to the corresponding temperature
Responsible Person in the EU:
LKM electronic GmbH
Elgersburger Straße 1
99331 Geratal
Germany
info@lkmelectronic.de
https://lkmelectronic.de/
