Indoor temperature/humidity probe LKM446
LKM446 Temperature/Moisture probe with output 0...10V
The LKM446 is a room temperature/humidity probe with integrated transmitter and two voltage outputs 0...10V. It can be used to measure temperature and humidity values in buildings, systems and control cabinets. It is suitable for direct connection to evaluation devices with voltage input such as PC cards or PLCs. The sensor is supplied fully calibrated. Minor corrections can be made on site by means of two controllers.
The cable outlet is located on the rear panel, a side cable outlet is optionally available.
The selection menu is available for configuration.
Please request individual measuring ranges beforehand using the >>Ask about product<< button.
| Input: | Semiconductor sensor | integrated |
| Measuring range temperature: | 0...50°C | programmable -20...80°C |
| Measuring range humidity: | 0...100% r.H. | guaranteed values 5...95% |
| Supply voltage: | 15...35VDC, 15...26VAC | |
| Output: | 2x 0...10V | |
| Max. Output current | 1mA | |
| Measuring error temperature: | typ. 0,5°C | at 25°C |
| Measuring error Humidity: | <2% | |
| Operating temperature range: | -20...80°C | |
| Humidity: | <95% | |
| Clamping type: | Screw terminals | |
| Clamping range: | 0,13...1,5mm² | |
| Dimensions: | 70x70x25mm | W x D x H |
| Weight: | approx. 50g | |
| Housing: | PVC white | |
| Degree of protection: | IP20 | |
| EMC: | EN 61326-1 EN 61326-2-3 |
Emission and noise immunity |
Documents
| Document | Format | Language(s) |
|---|---|---|
| Datasheet – LKM446 Technical Specification |
  |
|
| Operating Instructions – LKM446 Installation and operating manual |
|
Software
| Program / Package | Format | Language(s) |
|---|---|---|
| Program – AnalogToTemperatur Conversion of analog output values (mA or V) to temperature |
ZIP | |