Transmitter LKM467
Please note: Orders placed after December 19, 2025, will be processed starting January 5, 2026. Thank you for your understanding.
LKM electronic GmbH wishes all customers a Merry Christmas.
The LKM467 is a digital, configurable transmitter for mounting in an IP64 housing and is designed for Pt100 and Pt1000 measuring resistors according to DIN EN 60751. The sensor is automatically recognized. It converts the temperature dependent resistance value of the sensor into a standard signal of 0...10V. 12 different measuring ranges can be set via four DIP switches. Lead resistances are largely compensated by means of a three-wire circuit. A two-wire circuit can also be implemented. The components are specially protected by dip coating.
With a zero point controller, a small correction can be made on site.
The following measuring ranges can be configured:
| -100...100°C | -30…70°C | 0...50°C | |
| -50...50°C | -20…80°C | 0...100°C | |
| -40...60°C | -20…150°C* | 0...150°C | |
| -30...60°C | 0...40°C | 0...200°C | *Preset |
| Input: | Pt100 / Pt1000 | self-recognizing, 2-/3- conductor circuit |
| total measuring range: | -100…200°C | adjustable via DIP switch |
| Number of ranges: | 12 | |
| Measuring current: | 0.25mA | |
| Current consumption: | max. 10mA | |
| Supply voltage: | 15...35 VDC, 15...26 VAC | reverse voltage protected |
| Resolution: | 0,1°C | |
| Measurement accuracy: | 0,2K | |
| Measurement rate: | 2/s | |
| Output: | 0…10V | other output voltage possible |
| Sensor break: | >10V | |
| Short circuit: | 0V | |
| Clamp type: | Screw terminals | 0,13…1,5mm2 |
| Temperature coefficient: | <0.015K/°C | adjusted temperature range 0...100°C |
| Operating temperature range: | -40…85°C | |
| Dimension: | 47x41mm | |
| Weight: | 20g | |
| EMC: | EN 61326-1 EN 61326-2-3 |
Emission and noise immunity |
| Document | Format | Language(s) |
|---|---|---|
| Datasheet – LKM467 Technical Specification |
||
| Operating Instructions – LKM467 Installation and operating manual |
| Program / Package | Format | Language(s) |
|---|---|---|
| Program – AnalogToTemperatur Conversion of analog output values (mA or V) to temperature |
ZIP |
Responsible Person in the EU:
LKM electronic GmbH
Elgersburger Straße 1
99331 Geratal
Germany
info@lkmelectronic.de
https://lkmelectronic.de/
{{.}}
{{/content}}{{{.}}}
{{/content}}