Transmitter LKM108 for Pt100/Pt1000
The LKM108 is an analog transmitter for mounting in the connection head type B and can be designed for the Pt100 or Pt1000 measuring resistor according to DIN EN 60751. It converts the temperature-dependent resistance value of the sensor into a standard signal of 0...20mA by means of 3-wire technology. The lead resistance of the two-wire circuit can be compensated on site with the adjustment controller. The components are particularly protected by complete encapsulation with polyurethane.
The transmitter is supplied calibrated to customer specifications. Subsequent fine adjustment can be carried out on site by means of span and zero controllers.
The selection menu is available for standard configuration and can be used for typical settings.
These can be specified directly in the optional comment field below the selection menu.
Important Conditions: Please ensure that the measurement range falls within the specification limits of the respective sensor and has a minimum span of 20K. This guarantees that the desired range is technically feasible.
Our team will review your order for feasibility. If any issues arise, we will contact you to find a suitable solution.
| RTD element | Specification range in °C |
|---|---|
| Pt100 | -200 – 850 |
| Pt1000 | -200 – 450 |
| Feature | Value | Remark |
|---|---|---|
| Input | Pt100 / Pt1000 | 2-wire connection |
| Measurement current | approx. 0.8 mA | depends on temperature |
| Zero point | -200 – 600 °C | |
| Span | 20 – 850 K | |
| Linearity error | < 0.1 % FS | |
| Supply voltage | 18 – 30 VDC | reverse polarity protected |
| Max. supply current | 40 mA | |
| Output | 0 – 20 mA | current loop |
| Max. load resistor | 150 Ω | |
| Sensor break | > 20 mA | |
| Sensor short circuit | 0 mA | |
| Response time | < 0.1 s | |
| Temperature coefficient (TC) | < 100 ppm/°C | |
| Operating temperature range | -40 – 85 °C | |
| Humidity | < 95 % RH | |
| Mounting | B-head | |
| Dimensions | 44 × 27 mm | D x H |
| Potting compound | Polyurethane, black | |
| Clamping type | Screw terminals | |
| Clamping range | 0.13 – 1.5 mm² | |
| Weight | approx. 40 g | |
| Vibration | 5 g / 10 – 200 Hz | |
| EMC | EN 61326-1 EN 61326-2-3 |
emission and immunity |
Documents
| Document | Format | Language(s) |
|---|---|---|
| Datasheet – LKM108 Technical specification |
  |
|
| Operating Instructions – LKM108 Installation and operating manual |
|
Software
| Program / Package | Format | Language(s) |
|---|---|---|
| Program – AnalogToTemperatur Conversion of analog output values (mA or V) to temperature |
ZIP | |
Responsible Person in the EU:
LKM electronic GmbH
Elgersburger Straße 1
99331 Geratal
Germany
info@lkmelectronic.de
https://lkmelectronic.de/
