LKM751
The LKM751 is a radio receiver for DIN rail mounting. It works as a coordinator in small low-power radio networks according to the international standard IEEE 802.15.4 in the license-free 868MHz band. Up to 16 participants can be integrated in one network. Different networks can be operated side by side.
The programming of the different parameters and the output of the values is done via the USB interface. A solid state relay is used to generate a signal when the battery is discharged. Another one can be configured as an alarm signal. In addition, a digital signal is still available via an RS485 interface as well as the USB interface. The RS485 interface can be switched between internal protocol and Modbus RTU. Via the internal BUS in the DIN rail up to two LKM752 for 8 analog outputs can be controlled.
Up to 4 measured values can be displayed locally on the optional display unit.
When mounting the LKM751 in a control cabinet, the antenna must be mounted outside the cabinet.
Included in delivery:
- LKM751
- USB cable 1m
- Manual
- The PC software is available as a free download
If you order additional items from the category "radio sensors" such as analog modules, radio transmitters or repeaters for the LKM751, we will set up the radio system according to your configuration.
The system can thus be put into operation very easily. Own changes are of course always possible with the PC program "WPAN75X" via the USB interface.
